Warning: Last items in stock!
The LokSound 5 micro is a “little miracle”: With a footprint of only 21mmx10mm, it is by far the smallest LokSound decoder that we have ever built. It should therefore be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is also always included.
The LokSound 5 micro is also a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.
It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.
Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.
The M4 protocol enables automatic registration at mfx®-compatible control centers.
The LokSound 5 micro decoder recognizes the Märklin® braking distances as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokSound 5 micro decoder can be used on analog DC and AC railways (!).
The LokSound 5 micro decoder can play up to 10 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers HiFi quality on your system. You can hardly hear any difference from the original. A class-D audio amplifier with up to 3W output power controls the speakers, which may have an impedance between 4 ohms and 32 ohms. The huge 128 Mbit sound storage provides enough capacity.
All individual noises can be individually adjusted in volume. The super flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles.
Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs and a logic level output. There are two more logic level outputs on the Next18 interface, which can alternatively control RC servos. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.
The engine control of the LokSound 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 0.75A motor current, the LokSound 5 decoder delivers enough juice for all intended use scenarios.